The Silkland DP80 DisplayPort Cable review is most relevant to gamers who need a short connection between a DisplayPort equipped PC and monitor and want support for high refresh rates.
Its 1.6 foot length keeps a nearby setup tidy, while its headline modes depend on compatible graphics hardware, display, and settings.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high bandwidth DisplayPort cable for gamers pairing DP 2.1 UHBR20 capable graphics cards and monitors.
- VESA certified DisplayPort 2.1 cable, with a stated 80Gbps data transfer rate and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.
- With DSC enabled, listed maximum modes include 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz, 480Hz, or 360Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
Pros
- High stated bandwidth and a range of high refresh modes for compatible source and display combinations.
- VESA certification and UHBR20 compatibility suit buyers assembling a current high bandwidth DisplayPort chain.
Consider before buying
- The 1.6 foot length leaves little room for longer routing or a PC positioned away from the display.
- The highest listed resolutions and refresh rates rely on compatible graphics hardware, monitor support, and DSC where specified.
Read the full review summary
The DP80 is a male to male DisplayPort 2.1 cable with VESA certification and a stated data rate of 80Gbps.
Silkland lists uncompressed support for 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, plus modes up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz with DSC enabled.
That makes it a feature rich option for a high end gaming setup, provided the connected devices can use the relevant bandwidth and display modes.
Its short reach is the defining practical consideration.
At 1.6 feet, it is suited to a computer and monitor positioned close together, such as a compact desk arrangement, and less suitable when the cable must route behind furniture or reach a distant display.
The no latch connector design, nylon exterior, triple shielding, and 24 month service period round out the package; buyers should choose it for the connection they actually need rather than for a high maximum resolution alone.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth ceiling
The stated 80Gbps rate and UHBR20 compatibility target a high bandwidth DisplayPort setup.
High refresh options
The listed uncompressed and DSC modes offer several high refresh combinations, contingent on compatible equipment.
Short desk fit
Its 1.6 foot length can keep a close PC to monitor connection compact, but limits reach.
Connector convenience
The no latch design is intended to make plugging and unplugging straightforward.
Cable construction
Tinned copper conductors, triple shielding, and a nylon exterior are useful construction features for a desktop cable.
Setup flexibility
It supports MST and backward compatibility, though its short length and DisplayPort only connectors define the setup.
Key Features and Specifications of Silkland DP80 Cable
- VESA certified DisplayPort 2.1 cable, with a stated 80Gbps data transfer rate and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.
- With DSC enabled, listed maximum modes include 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz, 480Hz, or 360Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
- Male to male DisplayPort connectors; the cable is 1.6 feet long and uses a no latch plug design.
- Construction includes 28AWG tinned copper conductors, triple shielding, 24K gold plated connectors, and a nylon exterior.
- Backward compatible with DisplayPort 2.0 and 1.4; Silkland provides a 24 month service period and technical support.
Pros and Cons of Silkland DP80 Cable
Pros
- High stated bandwidth and a range of high refresh modes for compatible source and display combinations.
- VESA certification and UHBR20 compatibility suit buyers assembling a current high bandwidth DisplayPort chain.
- The short cable can reduce excess slack when the PC and monitor sit close together.
- No latch plugs may be easier to remove from ports in a tight desktop setup.
- Triple shielding, tinned copper conductors, and nylon outer covering provide a substantial construction feature set.
Consider before buying
- The 1.6 foot length leaves little room for longer routing or a PC positioned away from the display.
- The highest listed resolutions and refresh rates rely on compatible graphics hardware, monitor support, and DSC where specified.
- It is a DisplayPort to DisplayPort cable, so buyers need matching DisplayPort ports on both connected devices.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the DP80 if your graphics card and monitor both have DisplayPort and you want a short cable for a close desktop connection.
Its stated UHBR20 support and 80Gbps data rate make it a plausible match for a system built around demanding refresh rate modes, while backward compatibility can also suit older DisplayPort devices.
Before buying, check the exact output and input capabilities of your graphics card and monitor, along with the resolution and refresh rate you intend to use.
Some of the most ambitious listed modes require DSC, and the cable itself cannot make an incompatible source and display combination run at those settings.
The no latch connector design and flexible multi-monitor features add practical value if they match your setup.
Treat the 24 month service period as useful support coverage, and measure the PC to monitor path so the short cable does not become the limiting factor.
Who should skip it
Skip this length if your cable must travel around a desk, through a cable tray, or between devices with substantial separation; measure the route and leave room at both ends before choosing.
Choose a different connection type or cable length if either device lacks a DisplayPort port or your setup needs more reach.
Confirm the monitor and graphics card support the target mode before paying for a cable with high bandwidth claims.
How the Silkland DP80 Cable fits a high refresh setup
Bandwidth and display modes
The DP80 is designed for a high bandwidth link: the product details give an 80Gbps rate and UHBR20 compatibility.
Its listed modes distinguish between uncompressed operation and modes using DSC, so buyers should match the desired resolution and refresh rate to the capabilities of both ends of the connection.
The maximum figures describe supported combinations, not a guarantee that every monitor and graphics card will offer them.
Length is a real setup constraint
A 1.6 foot cable is at home when the computer sits beside or directly under a monitor with a short path between ports. This can help avoid a coil of spare cable on a compact desk.
It also makes measurement important: account for the path around the back of the PC and monitor and for enough slack to avoid pulling at the connectors.
Gaming and multi-monitor features
VRR, FEC, ALLM, DSC 1.2a, and MST are among the listed features, alongside support for G-Sync and FreeSync. These features can be relevant to gaming or multi-monitor arrangements, but they depend on compatible devices and configuration.
For a multi-screen setup, check the graphics card's outputs and monitor arrangement, and follow Silkland's guidance to use the same cable type across the screens.
Connector and cable build
The cable uses male to male DisplayPort connectors, a no latch plug design, tinned copper conductors, triple shielding, and a nylon exterior.
These are useful construction details for a cable that may be connected and routed around a desk. Its short reach also means buyers can minimize strain by planning the route and placing devices before connecting it.
Alternatives to Silkland DP80 Cable
One useful alternative is included because it offers the same basic DisplayPort connection with a substantially longer reach and a different stated bandwidth ceiling.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 if your devices sit close together and you want its higher stated bandwidth ceiling. Consider the 10 foot option when the longer route is more important and its listed modes fit your intended setup.
- This 10 foot Silkland cable has a stated 54Gbps rate and lists 4K at 240Hz and 8K at 120Hz, with 16K at 60Hz using DSC.
- Its description also lists Dynamic HDR, HDCP 2.2, DSC 1.2a, and a braided exterior.
- The DP80 pairs a stated 80Gbps data rate with a 1.6 foot length, making it the more compact choice for nearby devices.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a high refresh gaming PC and monitor positioned close together.
Its 80Gbps rating, VESA certification, and listed DisplayPort 2.1 features make it a strong fit on paper for compatible hardware, and the short run may suit a tidy desktop.
Buy after checking port compatibility, target display modes, and cable routing. The short length is the clearest constraint, while the highest resolution and refresh claims depend on the capabilities of the connected devices and DSC where specified.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A short, high bandwidth DisplayPort cable for gamers pairing DP 2.1 UHBR20 capable graphics cards and monitors.
- VESA certified DisplayPort 2.1 cable, with a stated 80Gbps data transfer rate and UHBR20 support.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz.
- With DSC enabled, listed maximum modes include 16K at 60Hz, 8K at 240Hz, and 4K at up to 540Hz, 480Hz, or 360Hz.
- Supports VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.